S'il vous plaît choisir votre devise:
Aller
S'il vous plaît choisissez votre pays:   Deutsch Englisch Französisch
Information produit
Dernier produit Produit 3 de 10 Prochain produit en categorie Alphanumeric Displays  Alphanumeric Displays
Data East Secret Service Display

Data East Secret Service Display

Aucun vote encore 0 Critiques
Se faire:
 Se faire
Nr. Article:  10009
PinLED
filtre: 
Prix:  
[incl. 19% TVA en sus Frais de port]
Qte:   

The PinLED display sewt 10009 is suitable for all Williams and Data East pinballs with 2x7 digit alphanumeric and 2x7 numeric displays.

Fits the following pinballs:

Williams Data East
Big Guns Playboy 35th Anniversary
Cyclone Secret Service
Fire Time Machine
F14 TomCat Torpedo Alley
Space Station  
Swords of Fury  


 

Installations guide for the PinLED Display-Set 10009
Before you begin with the installation of the PinLED Display-Set please check the contents of your packaging.
1. The new PinLED- Display
2. Four spacers
3. This installation guide
You need a Phillips screwdriver for the installation. If you have further questions – please let us know…. support@pinled.de. Then you get help as soon as possible.
If you follow the next steps the installation is very easy and safe.

1. Unplug the mains plug.
2. Open the Backbox.
3. Put the Display / Speaker Panel on the pane of the playfield. (not necessary at Data East machines)
4. Disconnect the cables from the original display.
5. Remove the four screws of the old display. You will need them later on to mount the new display. For Data East: Press the ends of the mounting brackets together and pull the old display out.
6. Remove the old display.
7. Get the new PinLED Display into suitable position.
8. Take the four in the PinLED Display-Set included spacers into suitable position. For Data East: You don’t need the four spacers, just plug the PinLED Display in the four brackets.
9. Mount the PinLED Display with the four screws. For Data East: There aren’t any screws to mount.
10. Connect the cables from the system 11 board to the new display. You can't mix them up! The red wire of the flat cable shows on the new PinLED Display board to the left (Pin 1) and on the system 11 board to the right (Pin 1).
11. Remove the high voltage fuses on the power supply board. There are one or two fuses depending on you board! This is only to be on the safe side. The new PinLED Displays will also work with installed fuses. But the high voltage isn't longer in use after the conversion to PinLED Displays.
12. Build in the Display / Speaker Panel. For Data East: Don’t necessary.
13. Install the Back glass again.
14. Connect the mains plug.
15. That's it! Switch on the pinball and enjoy playing in new dimensions.....

Il n'y a pour le moment aucune critique sur ce produit.

Soyez le premier à évaluer ce produit. Aimeriez-vous ajouter votre avis?

Toutes les infos smartphones:

Numérisation et aller. Obtenez toutes ces informations sur votre smartphone.

www.PinLED.de Les clients qui ont acheté ce produit ont aussi acheté

Williams Bad Cats Display
Williams Bad Cats Display
199,00 €
[incl. 19% TVA en sus Frais de port]
ORANGE Dotmatrix Display 128x32
ORANGE Dotmatrix Display 128x32
229,00 €
[incl. 19% TVA en sus Frais de port]
Bally Bugs Bunny Birthday Pinball Display-Set
Bally Bugs Bunny Birthday Pinball Display-Set
199,00 €
[incl. 19% TVA en sus Frais de port]
Bally Mousin Around Display-Set
Bally Mousin Around Display-Set
199,00 €
[incl. 19% TVA en sus Frais de port]
Williams Taxi Display 2x16 digits
Williams Taxi Display 2x16 digits
219,00 €
[incl. 19% TVA en sus Frais de port]
Data East Laser War Display Set
Data East Laser War Display Set
219,00 €
[incl. 19% TVA en sus Frais de port]
 
"Mon compte"
Mes commandes
Mes factures
CGV
Retraction
Intimité
Conditions d'expédition
Paiement
Contact
Empreinte

Dieser Shop wurde vollständing mit store-systems.de
B2C Shop Pro 7.0 implementiert
Alle Rechte vorbehalten
Alle Preise inkl. MwSt. zzgl. Versandkosten 

Shopsystem u. Shopsoftware von store-systems.de

1146 - Table 'pinledStoreSystems.user_tracking' doesn't exist

insert into user_tracking (customer_id, full_name, session_id, ip_address, time_entry, time_last_click, last_page_url, page_desc) values ('', 'Guest', 'qch37d5a7vqpm9uo0k6ilo3907', '54.227.31.145', '1544834725', '1544834725', '/product_info.php?cPath=4_15_1_9_7_38&products_id=76&osCsid=qch37d5a7vqpm9uo0k6ilo3907', 'Data East Secret Service Display')

[TEP STOP]